Showing posts with label iem. Show all posts
Showing posts with label iem. Show all posts

Saturday, January 2, 2010

Construction Quality Program in Oil & Gas Industry

Simple update to IEM Members or those who are practicing Engineering in MALAYSIA...

Construction Quality Program supports the overall Project Quality Management during the construction phase of oil and gas projects. Construction Quality Program is an enhancement on the conventional Site Construction Quality Plan by implementing Project Turnover Work Process until Commissioning and Start-Up-Phase.

Among others, the talk will cover the following aspects : -
  • Using Site Quality Plan to execute the project construction activities
  • Enhancing Site Quality Plan by exploring best practice quality program
  • Adopting Interface Quality Management among key project team members such as engineering, procurement, construction, commissioning and operation
  • Maintaining consistent monitoring and verification activities to ensure that commissioning work commences only after construction activities and mechanical completion integrity checking have been completed 

Construction Quality Program is Implemented throughout the construction phase by focusing on critical construction programs such as Piping Hydrotest Quality Program, Mechanical Completion Quality Program, Punchlist Quality Management, etc. Sharing of construction quality during construction phase will result in lesions learnt and best practices in the industry.

A talk on "Construction Quality Program in Oil & Gas Industry", organized by Oil, Gas and Mining Technical Division, IEM has been scheduled.

DATE : 9 JANUARY 2010 (Saturday)
TIME : 9.30 am TO 11.30 am ( Refreshment will be served at 9.00 am.)
VENUE : 2nd Floor, Wisma IEM, PETALING JAYA
CPD : 2 hours
SPEAKER : IR. ROSLIN BIN RAMLI



Monday, August 24, 2009

Emerging Technologies to Monetize Small Natural Gas Resources

Display problem ? Click HERE

Simple update to IEM Members or those who are practicing Engineering in Malaysia...

The number of large natural gas fields for mankind’s exploitation is reducing as we go into the future. Future natural gas fields are relatively smaller, scattered in various geographical locations and contains higher acidic components. As the world’s energy demand continues, there is an urgent need to develop emerging technologies to monetize small natural gas resources around the globe which could not be economically carried out now.

The emerging technologies have to be safe, economical and more robust than presently available technologies for successful and meaningful gas production. This presentation will share several emerging technologies currently being studied and developed by the oil and gas industry for such purpose.

A talk on "Emerging Technologies to Monetize Small Natural Gas Resources", organized by Chemical Engineering Technical Division, IEM has been scheduled.

Date : 10 October 2009 (Saturday)
Time : 9.00 am – 11.00 am (Refreshment would be served at 11.00 am)
Venue : C&S Lecture Room, 2nd Floor, Wisma IEM, Petaling Jaya
Speaker : Engr. Dr. Chan Tuck Leong




*Any queries, please contact sec@iem.org.my.

Related Post

Wednesday, April 8, 2009

HSE in projects - Focusing on design

Display problem ? Click HERE

Although International and National Oil and Gas companies are outsourcing more and more services to contractors, they still have the responsibility for formally demonstrating that HSE is being managed satisfactorily in all of their assets. It is becoming a mandatory requirement by governmental bodies globally that O&G companies submit this demonstration (i.e., HSE Case) for approval to conduct the asset operation. In Malaysia, for example, these take the form of Environmental Impact Assessment (EIA) reports by DOE or Safety Reports by DOSH as relevant.

The objective of this talk is to provide an overview of the phases of a project along with the project management controls necessary for the successful management of HSE as applicable to E&P type projects. It will describe the specific applications of Hazards and Risk Management tools at key stages of the project and will review how the ALARP target factors in on major project conceptual and detailed design decisions and direction.

The talk will focus, on various project stages and the relevant HSE objectives, tools and techniques that typically are employed to achieve the desired objectives and the deliverables expected at the end of each stage. It will also provide pointers to more detailed references and guidance for their application. It is not the intention of this talk to provide a complete specification of the HSE activities to be undertaken at each stage of a project. Nonetheless, it will provide guidance on key activities that need to be considered by those responsible for project design.

A talk on "HSE in projects - Focusing on design", organized by Oil, Gas & Mining Technical Division, IEM has been scheduled.

Date : 13 April 2009 (Monday)
Time : 5.30 pm to 7.00 pm
CPD : 2 Hours (approved by BEM)
Venue : Wisma IEM (New Building), Petaling Jaya
Speaker : Mr. Christopher James Bernard (CJB







*Any queries, please contact
sec@iem.org.my.

Related Post

Monday, March 30, 2009

Energy Aspect In Industrial Drying

Display problem ? Click HERE

Simple update to IEM Members or those who are practicing Engineering in MALAYSIA...

Thermal drying operations are found in almost all industrial sectors and are known to consume 10-25% of the national industrial energy in the developed world. With emerging economies rapidly industrializing various economic sectors, the energy consumed for thermal drying and the resulting adverse environmental impact of the greenhouse gas emissions will inevitably rise with time. The most effective solution to this growing problem is to develop and utilize highly energy-efficient drying technologies that will reduce net energy consumption and mitigate the environmental impact.

Over the last three decades much progress has been made in this area. This talk will present an overview of the causes for inefficiency in industrial drying and provide a summary of numerous new attempts to enhance the performance of drying technologies in diverse industries. In particular, advantages of heat pump-assisted drying, superheated steam drying, pulse combustion and pulse combustion-assisted drying, utilization of waste heat and renewable energy for drying etc will be discussed along with selected case studies. In addition, the efficiencies of dryer systems can also be improved by multi staging, combining different types of dryer and by intermittent and multi-mode heat inputs for batch dryers. With over 400 types of dryers used to dry some 50,000 materials at various production scales, it is necessary to examine the problem at the fundamental level of dehydration.

A talk on "Energy Aspect In Industrial Drying", organized by Chemical Engineering Technical Division, IEM has been scheduled.

Date : 23 April 2009 (Thursday)
Time : 5.30 pm to 7.00 pm
CPD : 2 Hours (approved by BEM)
Venue : 2nd Floor, ISM Seminar Hall, Bangunan Jurukur, Petaling Jaya
Speaker : Engr. Assoc. Prof. Dr. Law Chung Lim

*Any queries, please contact sec@iem.org.my.

Related Post

Industrial Drying

Display problem ? Click HERE

Simple update to IEM Members or those who are practicing Engineering in MALAYSIA...

There are over 400 dryer types cited in the technical literature although only about 50 types are commonly found in practice. As such proper selection of dryer is an important topic to industrial drying. Dryer selection has long been practiced as an art rather than science depending more on prior experience and vendors’ recommendations. As drying technologies have evolved and become more diverse and complex, this has become an increasingly difficult and demanding task for the non-expert. Further, the task is exasperated by the need to meet stricter quality specifications, higher production rates, higher energy costs and stringent environmental regulations.

This talk intends to give an introduction to industrial drying and briefly discuss the classification of industrial dryers. The key classification criteria for industrial dryers will be discussed as well as selection criteria. It is important for an engineer responsible for selection of a dryer or a drying system to be aware of what is available in the market, what the key criteria are in the selection process and thus arrive at alternative possibilities before going to vendors of such equipment for comparative quotes. It is time and effort well spent since the cost of incorrect selection can be very high. It was reported that over 80 percent of major chemical companies in Europe – each using over 1000 dryers in their production facilities – made errors in selecting dryers. What is optimal choice in one location at one point in time may be a wrong choice for another geographic location some years later. Prior use is a definite help but not the only criterion to be used in selecting drying systems.

A talk on "Industrial Drying", organized by Chemical Engineering Technical Division, IEM has been scheduled.

Date : 21 April 2009 (Tuesday)
Time : 5.30 pm to 7.00 pm
CPD : 2 Hours (approved by BEM)
Venue : 2nd Floor, ISM Seminar Hall, Bangunan Jurukur, Petaling Jaya
Speaker : Engr. Assoc. Prof. Dr. Law Chung Lim


*Any queries, please contact sec@iem.org.my.

Related Post

Saturday, February 28, 2009

MALAYSIAN Oil and Gas Deepwater Development Talk

Display problem ? Click HERE

Simple update to IEM Members or those who are practicing Engineering in MALAYSIA...

It is anticipated that there will be less commercially viable oil & gas fields in the Malaysian shallow water. As such, there is an increased push towards developing fields in the deep (200-1000m water depth) and ultra-deep (more than 1000m water depth) water. In line with this shift, Petronas has set the tone by stating its ambition to make Malaysia as the regional deepwater hub and, along with its Production Sharing Contractors, has set the ball rolling by the successful project execution of and oil production from Kikeh Deepwater Development. The presentation intends to share presentor's general experience in the deepwater projects, which covers background, introduction to technologies, challenges/opportunities, and Kikeh development examples.






A talk on "MALAYSIAN Oil and Gas Deepwater Development", organized by Oil, Gas and Mining Technical Division, IEM has been scheduled.

Date : 19 March 2009 (Thursday)
Time : 5.30 pm to 7.00 pm
CPD : 2 Hours (approved by BEM)
Venue : IEM Conference Hall, Bangunan Ingenieur, Petaling Jaya
Speaker : Ir. Ahmad Sidek
*Any queries, please contact sec@iem.org.my.

Related Post

Wednesday, January 21, 2009

Role of CE in BioTech Talk

Display problem ? Click HERE

Simple update to IEM Members or those who are practicing Engineering in MALAYSIA...

Biotechnology is a multi-disciplinary area, encompassing the biological sciences, industrial technology and bioprocess engineering. It involves using living cells or biological catalysts for the production of industrial products and services. Chemical engineers can make a significant contribution in the bioreactor operation and subsequent downstream processing for the separation and recovery of products. Chemical engineers can also help to develop integrated processes for energy and resource recovery to improve existing biotechnological processes.

The talk will cover the important role of chemical engineers in the biotechnology sector, with special emphasis on process substitution for new biotech products and developing appropriate technologies for our local biotechnology industry based on the speaker’s experience.

A talk on “ROLE OF CHEMICAL ENGINEERS IN BIOTECH SECTOR’”, organized by Chemical Engineering Technical Division, IEM has been scheduled.

Date : 03 February 2009 (Tuesday)
Time : 5.30 pm to 7.00 pm
CPD : 2 Hours (approved by BEM)
Venue : IEM Conference Hall A, Bangunan Ingenieur, Petaling Jaya
Speaker : Professor Dr. Mohd Ali Hassan


*Any queries, please contact sec@iem.org.my.

Related Post

Saturday, December 27, 2008

Technology and Global Warming Talk

Display problem ? Click HERE

Simple update to IEM Members or those who are practicing Engineering in MALAYSIA...

The atmosphere acts as an insulating blanket to keep the average temperature of our planet Earth within a pleasant ange. The green house effect on the trace gases of the atmosphere, such Carbon Dioxide, keep the heat near the Earth surface and keep out the cold of the outer space. The climate of Earth however is unstable and since the end of the ice age some 10,000 years ago, the average temperature of the Earth has increased steadily from a few degrees Centigrade to more than 15 degrees Centigrade. Since the Industrial Revolution, the Carbon Dioxide concentrations have increased from about 280ppm to 365ppm and the Earth temperature goes up as the Carbon Dioxide concentrations increase. The effect of global warming is a change in the climate and weather patterns which hastens the extinction of species, influence the lengths of seasons, cause coastal flooding, and lead to more frequent and severe storms. The response to global warming includes the ratification of the Kyoto Protocol which expires in 2012 by all countries except United States and Kazakhstan after the United Nations climate talk in December 2007. The solution to global warming is Carbon (Greenhouse Gases) Management and the strategy is three pronged, i.e. Policy, Education and Technology.

A talk on “TECHNOLOGY and GLOBAL WARMING’”, organized by Agricultural and food engineering technical division has been scheduled.

Date : 24 January 2009 (Saturday)
Time : 9.30 am to 11.00 am
CPD : 2 Hours (approved by BEM)
Venue : 2nd Floor, Conference Hall, Bangunan Ingenieur, Petaling Jaya
Speaker : Engr. Ooi Ho Seng







*Any queries, please contact sec@iem.org.my.

Related Post

Saturday, November 1, 2008

Simple but Effective Approach to Hazard Analysis in Oil & Gas Industry

Display problem ? Click HERE

Simple update to IEM Members or those who are practicing Engineering in MALAYSIA...

It has been a standard industrial practice to carry out hazard analysis for hazardous operations. However, accidents still happen and occasionally, the consequential losses are alarming. In many cases, the accidents could have been prevented if the hazard analysis had been more effectively completed or if the analysis findings (information pertaining the hazards and their controls) are communicated and hence, appreciated by everyone. In response to this, the Bowtie technique was invented and is being increasingly adopted in the oil & gas industry. It is simple and can be applied for all types of hazard such as fire/explosion, environmental pollution, work-related accidents, transportation accidents, security threat, health hazards and may others. It is suitable for other industries as well e.g. construction, fabrication, manufacturing, aviation, shipping etc. The Bow-tie technique emphasises on a pragmatic approach to identify not only hazard controls but also measures required to ensure the effectiveness of the identified controls. The overall findings are graphically presented in a bowtie-like skeleton that allows easy understanding and communication.

A talk on “The Bowtie Technique – Simple but Effective Approach to Hazard Analysis in Oil & Gas Industry”, organised by Oil, Gas and Mining Technical Division has been scheduled.

Date : 22 November 2008 (Saturday)
Time : 9.30 am to 10.30 am
CPD : 2 Hours (approved by BEM)
Venue : Conference Hall, Bangunan Ingenieur, Petaling Jaya
Speaker : En. Syed Zaidul Hamzah





*Any queries, please contact sec@iem.org.my.

Related Post

Thursday, October 16, 2008

A New Engineers Act Forum

Display problem ? Click HERE

Simple update to IEM Members or those who are practicing Engineering in MALAYSIA...

The Registration of Engineers Act, 1967 (i.e REA’67 or the Act) has a shelf life of more than 40 years. The Board of Engineers, Malaysia (BEM) was operationalised on the 23rd Aug, 1972 to implement the REA’67. The Act in its original form regulated the natural persons; the Malaysian engineers. Since the BEM came into being, the REA’67 has been amended four (4) times to suit prevailing circumstances, and we now have; registered engineers and ECP’s, Accredited Checkers, etc. Beside the REA’67, we also have the companion “1990 Regulation (2003)”; BEM Guides, and other BEM requirements-all these adding up to what can be described as “Measures” of the Malaysian PRA (i.e. the Professional Regulatory Authority”) over the practice of engineering in the country. Many Malaysian engineers believe that Malaysia needs an act which is suitable for the 21st Century. The IEM being the principle Advocate of the Malaysian Engineering Community, also think so. Accordingly, to get stake-holders’ inputs, a forum on “A New Engineers Act” is hereby proposed.

Date : 23rd October 2008
Time : 9.00 am – 5.00 pm
Venue : PKNS Seminar & Conference Centre
CPD : 8 CPD/PDP hours (BEM Approved)
Panelists : Engr. Rocky HT. Wong, Engr. P.E Chong, Engr. Chen Thiam Leong, Y.Bhg Dato’ Ir. Chew Swee Hock & Ir. Dr. Abdul Majid bin Dato’ Abu Kassim
Registration fee : Member RM 30.00 ; G & S RM 20.00

Friday, July 11, 2008

Engineering Services Outsourcing

Display problem ? Click HERE



Recommended :
Subscribe FREE - 9 Critical Reasons to Automate Performance Management!

The global sourcing marketplace has in the past decade grown and morphed to become a $1 trillion industry, with demand for a myriad of services spanning technology, infrastructure, business process and specialty engineering services fueling the growth. Over the past five years particularly, the engineering services marketplace has taken on a distinct turn on its own, today contributing to a demand close to an approximate $850 billion over and above the $1 trillion business already in the marketplace. Interestingly maturing markets and economies with robust infrastructure investments, and engineering capabilities are being sought after by engineering and manufacturing organizations in their quest to support their growth and innovation needs. Given pressures from demographics, and economic factors, most developed nations are sourcing for talent and engineering service capabilities across the globe.

Outsourcing Malaysia (OM), an organization focusing on outsourcing and sourcing competencies perceives that Malaysia’s competence in engineering has to be brought to the forte, and showcased to the world such that global businesses tap into our engineering competencies as well. This talk is aimed at providing one with a bird’s eye-view of the marketplace, demand trends, and opportunities for Malaysia to participate actively.

Outsourcing Malaysia (OM) is an initiative of the outsourcing industry in Malaysia and a Chapter of PIKOM. With the support from its institutional partners i.e. the Multimedia Development Corporation (MDeC) and the Malaysia Debt Ventures (MDV), and senior leaders from the global services industry; our outsourcing consortium aims to promote the capabilities and competencies of the Malaysian outsourcing industry.

Recommended :
Subscribe FREE - Chemical Processing

What is outsourcing ?
Outsourcing is contracting with another company or person to do a particular function. Almost every organization outsources in some way. Typically, the function being outsourced is considered non-core to the business. An insurance company, for example, might outsource its janitorial and landscaping operations to firms that specialize in those types of work since they are not related to insurance or strategic to the business. The outside firms that are providing the outsourcing services are third-party providers, or as they are more commonly called, service providers.
Read more.

Why choose Malaysia ?
Choose Malaysia as your offshore location - the regional gateway to the Asian markets - and a world of business advantages awaits you. Considered the world's largest exporter of semiconductors and consumer electronics, Malaysia has earned the reputation of being an attractive location for both trade and investments since the colonial era.
Read more.

Malaysia The Preferred Location For Outsourcing For Middle East Firms
Outsourcing Malaysia success in winning Middle East technology-based business and become the third most preferred location worldwide for outsourcing, but Outsourcing Malaysia's top representative at the inaugural Malaysian Services Exhibition 2008 believes that the country is the top destination for businesses in the Middle East who are looking to outsource services and processes abroad.
Read more here and here.

FAQ on Outsourcing Malaysia
A set answer to commonly asked question.
Read more.

Simple update to IEM Members or those who are practicing Engineering in MALAYSIA...

A talk on “Engineering Services Outsourcing Opportunities*”, organised by Information Technology Special Interest Group, IEM, has been scheduled.





Detail information as follow :

Date : 12 August 2008 (Tuesday)
Time : 5.30 pm to 7.30 pm
Venue : 2nd Floor, IEM Conference Hall, Bangunan Ingenieur, Petaling Jaya
Speaker : Mr. Bobby Varanasi and Mr. Andy Yau
CPD / PDP HOURS : 2. (BEM Approved Ref no : IEM08//HQ/200/T)

Prepared by Engr. Abdul Fattah bin Mohamed Yatim, MIEM

*IEM will be charging participants RM 10.00 administrative fee to evening talks organised by IEM. The fee would be used for overhead costs, building maintenance expenses as well as to support the purchase of the new building. Students are however exempted. Your understanding is greatly appreciated.
**Any queries, please contact sec@iem.org.my.

Related Post

Friday, June 6, 2008

Series of Talks for June...

Display problem ? Click HERE

Quick update to IEM members...

There will be a series of talks organize by IEM which may be interested to a Chemical & Process Engineers...




IEM Position Paper on "Energy Efficiency"
- A Forum to Consolidate the Draft Position Paper
Panelist : Engr. G Lalchand, Engr. Dr Phillip Tan, Engr. Gurmit Singh, Engr. Mah Soo & Engr. Chew Shee Fuee
24 June 2008, Tuesday (2 CPD) - 2nd Floor, IEM Conference Hall

Efficient use of energy (or Energy efficiency – EE) in Malaysia has been a national policy objective in several Malaysia Plans but has not been widely achieved for various reasons, a key reason being the low, heavily subsidized prices of energy. The Malaysian government has provided attractive incentives to encourage adoption of EE initiatives but their impact has been minimal. This paper concentrates on electricity use and addresses the various reasons for the lack of success. It assesses the economic impact of not using energy efficiently, identifies options and recommends mechanisms to successfully encourage adoption of initiatives for efficient use of energy.





Talk on "Complete Systematic De-Contamination and Treatment on HVAC
Speaker : Mr. William Rodney Yeo, MBA
19 June 2008, Thursday (2 CPD) - 2nd Floor, IEM Conference Hall

Bio-Film (jelly/slime), bacteria, fungal and mould is found in virtually aqueous environment such as cooling coils, heat exchangers, distribution pipes, cooling tower in-fills and or any substrates. Bacterial bio-films (jelly/slime) are one of the causes of “Sick Building Syndrome” and/or “Building Related Illnesses”, system fouling, product contamination, equipment failure, decreased productivity due to downtime for system cleaning, wear/tear, expensive replacement parts, reduction of airflow, reduction in heat transfer, scaling and loss in efficiency. This presentation will give you an insight of what is actually happening in the HVAC industry and how we are able to combat the problems.


Talk on "The Basics of Earned Value Management"
Speaker : Stephen P.Warhoe, P.E., CCE, CFCC, CCM
5 June 2008, Thursday (2 CPD) - 2nd Floor, ISM Conference Hall

Earned Value Management, or EVM is one of the most effective project management tools and cost control methods used today. Mr. Stephen Warhoe will introduce the attendees to EVM’s history and why it is so effective on projects that range from oil refinery construction projects to software development projects. He will discuss the basic concepts of EVM, including the integration of the project’s scope of work, budget, and schedule. Other related topics affecting the EVM system will be discussed including work breakdown structures, resource loading of the project schedule, forecasting final project costs, productivity issues, and potential flaws of EVM. A discussion on performance indices, the most effective aspects of EVM, will then follow. Mr. Warehoe will then conclude the presentation with some example problems. This presentation will provide an excellent overview for all project controls professionals.


Talk on "Business Continuity / Disaster Recovery - Trends, Challenges and Recovery Strategies"
Speaker : Mr. Lai Boon Wah
5 June 2008, Thursday (2 CPD) - 2nd Floor, IEM Conference Hall

The speaker will initially examine the fundamental reasons why there is a need for Business Continuity/Disaster Recovery (BC/DR) Planning and the types of business interruptions/disasters together with some overseas and local statistics presented. The BC/DR trends are analysed and then followed by presentation of the cost components and the spending patterns by companies, including some survey results. As most businesses today are heavily dependent on Information Technology (IT) to conduct business operation and transactions, various strategies addressing the specific requirements of the business entities to recover IT systems/applications, hardware servers, databases and networks in the event of disaster or any interruption are also discussed.


Related Post

Friday, May 16, 2008

Continuously Maintains Power Supply

Display problem ? Click HERE

An Uninterruptible Power Supply (UPS) or Continuous Power Supply (CPS) is a power supply system continuously maintains power supply to connected equipment from a separate source when main power supply is not available. There are off-line, line-interactive and double conversion type of UPS system.

In Process & Chemical or Oil & Gas plant, critical equipment such as control panel, computer, etc will be kept online to facilitate safe shutdown and quick restart-up. A half-day seminar on UPS will be conducted by Bernard Lee, a product manager with Eaton Power Quality on 23rd May 2009 at Wawasan Professional Training Center, dataran menteri Bandar Sunway. Details refer to following brochure.